Branding Methods
Below are our standard branding methods. Please reach out to us to see other examples, physical samples, or have a pre-production sample made for you.
Applique
Pieces of fabric are sewn onto the item to form the imprint
![Applique](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-4.jpg)
Deboss
Imprint is depressed into the item’s surface using a stamping die
![Deboss](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-2.jpg)
Deep Etch
Imprint is sandblasted, usually onto glass, creating a deep frosted look
![Deep Etch](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-3.jpg)
Emboss
Imprint is raised onto the item’s
surface
![Emboss](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-5.jpg)
Embroidery
Computerized sewing machines stitch the imprint onto the item
![Embroidery](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-6.jpg)
Foil Stamp
Metallic foils are applied to the item’s surface with heat and pressure
![Foil Stamp](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-7.jpg)
Full Colour
Imprint is printed in CMYK allowing for the use of photos and vivid colour graphics
![Full Colour](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-9.jpg)
Heat Transfer
Heat is used to thermally bond an imprint onto the item’s surface
![Heat Transfer](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-8.jpg)
Laser Engraved
Imprint is etched into the item via a laser
![Laser Engraving](https://keypromo.com/wp-content/uploads/2023/03/laser.jpg)
Pad Print
Imprint is transferred to the item via an inked flexible pad
![](https://keypromo.com/wp-content/uploads/2023/03/Pad-Print.jpg)
Satin Etched
A special ink used on glass giving a frosted look, like the look of engraving
![Satin Etched](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-10.jpg)
Screenprint
Ink is pressed through a screen onto the item’s surface, then heat cured
![Applique](https://keypromo.com/wp-content/uploads/2023/03/Branding-guide-1.jpg)